Furuno GP-33 GPS Receiver User Manual


 
4. ROUTES
4-2
4. Confirm that [New] is chosen, and press the ENT key to show the route informa-
tion.
5. Press the ENT key to change the route name.
6. Operate the cursorpad to enter the route name, and press the ENT key (maxi-
mum: six characters).
7. Press T then ENT key.
8. Operate the cursorpad to enter the comment (maximum: 18 characters).
9. Press T to move the cursor to [1], and press the ENT key.
10. Confirm that [Add] is chosen, and press the ENT key.
11. Select [Alpha] or [Local], and press the ENT key to show the waypoint list.
12. Select the waypoint to add to the route, and press the ENT key.
The chosen waypoint (as the starting point) is registered to [1].
13. Press T to select [2], and press the ENT key.
14. Repeat steps 10 through 13 to complete the route.
15. Press the MENU/ZOOM key several times to close the menu.
->
Change
Skip
Delete