Filter
Top Products
1. OPERATIONAL OVERVIEW
1-8
1.5 Menu Overview
Most operations of your unit are done through the menu. Below is a quick introduction
to how to select a menu and change menu settings. If you get lost in operation, press
the MENU/ZOOM key to return to the main menu.
1. Press the MENU/ZOOM key once or twice to display the main menu.
Press once: Steering display, nav data display, satellite monitor display, user dis-
play 1/2.
Press twice: Plotter display, highway display
Note: Following explanation takes the menus for the plotter display as an exam-
ple.
2. Press S or T to select an item, and press the ENT key.
3. Press ENT (or X) key.
For example, select [Plotter Setup] and press the ENT key.
4. Press S or T to select option desired.
For example, select [COG/BRG ref.]
5. Press the ENT key (or X).
A window shows the options for the item selected.
6. Press S or T to select option desired.
7. Press the ENT key (or X).
8. Press the MENU/ZOOM key (or W) twice to close the menu.
Cursor
*
*: Shown only when the
MENU/ZOOM key is
pressed at the plotter display.