Filter
Top Products
7. OTHER FUNCTIONS
7-13
7.7.1 Uploading data to a PC
1. Connect a PC to your GP-33, referring to the interconnection diagram at the back
of this manual.
2. Press the MENU/ZOOM key twice to show the main menu.
3. Select[ I/O Setup], and press the ENT key.
4. Select [Save WPT/RTE -> PC], and press the ENT key.
5. Press W to select [Yes], and press the ENT key to start the uploading.
6. When the completion message appears, press any key to finish.
7.7.2 Downloading data from PC
Note that all waypoint and route data stored in the GP-33 will be deleted when data is
downloaded from PC.
1. Connect a PC to your GP-33, referring to the interconnection diagram at the back
of this manual.
2. Press the MENU/ZOOM key twice to show the main menu.
3. Select [I/O Setup], and press the ENT key.
4. Select [Load WPT/RTE <- PC], and press the ENT key.
5. Press W to select [Yes], and press the ENT key to start the downloading.
6. After the completion message appears, press any key to finish.