Filter
Top Products
AP-3
4. ACCURACY
1) SHIP SPEED ±1 % or ± 0.1 kt
2) TIDE SPEED ±2 % or ± 0.2 kt
3) DIRECTION ±3.5 °(depending on sea condition)
5. TRACKING SPEED
1) SHIP SPEED Less than 40 sec.
2) TIDE SPEED Less than 60 sec.
6. SOUNDING FREQUENCY
130kHz approx.
7. DATA INPUT
1) HEADING DATA Clocked-serial (AD100)..................................................1ch
2) KEYING PULSE (for interference rejection) Current loop signal ...............................2ch
3) MISCELLANEOUSSerial (IEC1162, equivallent to NMEA0183) ..............................1ch
Heading; ($--HDT/HDM/HCD/HCC)
Depth; ($--DBS/DBT/DBK)
W-temp; ($--MTW)
Date/time; ($--ZDA/ZLZ/ZZU) --:any talker
8. DATA OUTPUT
1) LOG SIGNAL
200 pulses/nm Contact signal, forward only ...........................................2ch
(contact rating 0.2A/30V max.)
400 pulses/nm TTL level, forward only ..................................................1ch
2) EXTERNAL ALARM Contact rating 0.2A/30V)
Speaker output ................................................................1ch
(800mW into 4 to 8 ohms)
3) MISCELLANEOUS Serial (IEC1162, equivallent to NMEA0183).................1ch
Speed/course($VDVTG/VBW/VHW)
Set & drift ($VDVDR)
Tide spd/dir ($VDVCD)
Current ($VDCUR)
Serial (Furuno CI-7000 format) for data recording ........1ch
(Date/time,ship's speed/course, tide speeds/directions,water