Filter
Top Products
4-8
* MENU 4 *
KNOB ITEM
Jan/15/1997
KNOB SETUP
END : MENU KEY
MENU MODE
: MENU1
MENU2
MENU3
MENU4
TIME DATA
: INT
EXT
WT SPEED
: T/D
NAV FORMAT
: CIF
NAV AID
: GPS
NAV DATA
: LORAN-A
: L/L
TIME INT
: 1min
CRS CAL MODE
: GT
CRS CAL EXEC
: START
TIDE OUT INT
: 15sec
Knob
Knob
NAV-TIDE
NMEA
LORAN-C
ALL
SPD
NAV
DECCA
MAN
DR
!0Selection of data output interval (15sec, 30sec,1min, 2min, 5min or 10min)
9Used to calculate course calibration angle if “or” is selected in CRS CAL MODE adove.
(Press EVENT key to start.)
8Selection of method for automatic cource calibration calculation and calibration mode to use
“GT”: Calculates course calibration angle to equalize ground tracking course to that of
external navigator after 2 mile run.
“NAV”: Calculates course calibration angle to equalize tides before and after 10 minute
period.
“MAN”: Calculates course by using value entered manually in MENU 3-COURSE CALIB.
7Averaging time for converting position change into speed/data(1 to 10 min in 1 min steps,
effective only when selected “L/L” as NAV DATA above)
6Selection of source data for ship’s speed/direction display in nav-aided mode
5Selection of source navigator to receive spd/pos data
4Selection of communication data format with external navigator (Furuno CIF or NMEA0183)
3Selection of tracking mode when ground tracking unattainable (water tracking or nav-aided)
2Selection of date/time display by internal clock (CI-35/35H) or external navigator’s clock
(GPS)
1Press key to store (validate) the settings and to close the menu window.
MENU 4
(Note 1)
(Note 2)
(Note 3)
(Note 4)
1
2
3
4
5
7
8
9
!0
(Note 5)
(Note 6)
(Note 7)
(Note 8)
6
MENU