Filter
Top Products
LAMP TEST
1
Use arrows to enable the lamp test. Press to begin test. All System Status LED’s should illuminate.
Use arrows to disable the lamp test. Press to end test. System Status LED’s should turn off and
return to normal indications.
AUDIBLE TEST
1
Use arrows to enable the audible test. Press to begin test. The audible alarm should sound.
Use arrows to disable the audible test. Press to end test. The audible alarm will turn off.
USB TEST
1
Use arrows to enable the USB test. Press to begin test. A small test fi le is written to the USB fl ash drive
then read back from the drive. If the write/read is successful, the test is passed. After completion of the test the set-
ting will automatically return to disabled.
FLAGS
These fl ags are a part of a manufacturer level testing tool.
FACTORY
TOOLS
3
CLEAR DATA HISTORY
Use arrows to enable this option. Press to confi rm. Data History will be cleared and option will automati-
cally revert back to disabled.
NOTE: Once cleared, this data cannot be recovered.
3
CLEAR EVENT LOG
Use arrows to enable this option. Press to confi rm. The Event Log will be cleared and option will automati-
cally revert back to disabled.
NOTE: Once cleared, this data cannot be recovered.
3
RESET TO DEFAULTS
Use arrows to enable this option. Press to confi rm. The Mark II
XG will be reset to “out of the box” default
settings.
NOTE: All user and factory confi guration settings will be lost.
3
FIRMWARE UPDATE
This is a tool for installing fi rmware updates. Updates are installed from a USB fl ash drive. On screen instructions will
guide the process. Installing fi rmware usually takes just a few minutes, however, the controller is out of service during
this time.
ABOUT
Information is shown for: Model Number, Serial Number, Software (Part Number, Build Number, Date), and Boot Code
(Part Number and Version Information).
16
FACTORY
DIAGNOSTICS
RAW INPUT: ANALOG
Input values are shown. This information is for factory level troubleshooting purposes.
RAW INPUT: DISCRETE
Input values are shown. This information is for factory level troubleshooting purposes.
RAW INPUT: KEYS
Input values are shown. This information is for factory level troubleshooting purposes.
RAW OUTPUT: DISCRETE
Output values are shown. This information is for factory level troubleshooting purposes.
MARK IIXG STARTS
Displays the total number of times the Mark IIXG has been booted.