Filter
Top Products
FACTORY
CONFIGURATION
MODEL
3
SERIAL NUMBER
Use arrows to enter the controller serial number. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
MODEL
Use arrows to select required model number. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
BATTERY TYPE
Use arrows to select required battery type. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
BATTERY VOLTAGE
Use arrows to select required battery voltage. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
PRESSURE SENSOR
Use arrows to select if a pressure sensor (transducer) is used. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed. If disabled, menu op-
tions in SETTINGS/PRESSURE are disabled.
3
AUTOSTART NC
Use arrows to enable or disable this parameter. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
3
USER INPUT NUMBER
Use arrows to select input used for user defi ned option. Press to confi rm.
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
1
SCREEN SAVER
Use arrows to enable or disable the screen saver function. Press to confi rm.
NOTE: The display screen is designed to automatically dim 5 minutes after returning to the home screen and without
any activity. The screen will “wake up” or return to set brightness on a key press or any event that would cause a mes-
sage to appear on the screen. This feature is designed to prolong the life of the display. It is not recommended that
this function be disabled.
FACTORY
CONFIGURATION
OPTIONS
3
This is area where ordered options are added by the factory. Any user defi ned parameters for these options would ap-
pear in the SETTING/OPTION SETTINGS menu.
FACTORY
CONFIGURATION
ADC CALIBRATION
This area displays the values of the Analog to Digital Converter calibrations. This calibration is done by the manufac-
turer. Any changes to these settings would have to be made by the factory.
15
1
REMOVE DRIVE
Use arrows to enable or disable the Remove Drive feature. Press to confi rm.
Much like a computer, the Remove Drive feature ensures fi le closure prior to removing the USB fl ash drive from the
Mark IIXG. Use of this feature helps prevent fi le corruption.
NOTE: The Mark IIXG also features an automatic daily save function. Every day at midnight (0:00) the events for that
day are written to a fi le on the USB fl ash drive. This fi le is also a text fi le (.txt) and is named for the month, in the current
year folder under Firetrol (x:\Firetrol\2009\Sept.txt).
4
3
LOW SUCTION
Use arrows to select input used for Low Suction Pressure option. Press to confi rm.
NOTE: This value cannot be changed unless a Low Suction option has been selected in the options confi guration.