Filter
Top Products
36
©
2003
Directed Electronics, Inc.
Timer Mode
Timer Mode allows the operator to program the remote start system to start the engine every three
hours a total of 6 times. For a full description of Timer Mode activation refer to the owner's manual.
Diagnostics
The system’s microprocessor monitors and reports all active and violated zones when arming and
disarming. LED flashes indicate the active or violated zone; siren chirps indicate system status.
Arm/Disarm Diagnostics
The number of siren chirps will indicate the status of the system when arming and disarming. For
information on which zone is active or has been violated refer to the Table of Zones.
System Status Chirps
Table of Zones
NOTE: The Warn Away® response does not report on the LED, but will report on the LCD of the
transmitter/receiver.
Zone No. Trigger type Input description
1 Trunk (-) Input BLUE Multiplex Trigger (H1/6)
2 Shock Harness BLUE (-) Mux Sensor 1
3 Door Trigger GREEN (H1/5) and VIOLET (H1/7)
4 Shock Harness GREEN (-) Mux Sensor 2
5 Ignition YELLOW Ribbon Wire Harness or
PINK Heavy Gauge Relay Satellite Harness
6 Hood (-) GREY (H3/3) Instant Trigger
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3 second delay), 1 System armed with Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with Tamper Alert
Disarm 5 System disarmed NPC® active