Filter
Top Products
©
2003
Directed Electronics, Inc.
35
Multi-Level Security Arming
Multi-Level Security arming allows the operator to select which inputs and sensors are active during
a particular arming cycle. For a full description of Multi-Level Security Arming operation for testing
purposes refer to the owner's manual.
Nuisance Prevention
®
Circuitry
Nuisance Prevention Circuitry bypasses any zone that triggers the system more than three times
within a one-hour period. For a full description of NPC operations refer to the owner's manual.
Rapid Resume Logic
Rapid Resume Logic ensures that when the system is powered up it will return to the same state it
was in when power is disconnected. For a full description of Rapid Resume Logic refer to the
owner's manual.
IMPORTANT! When testing the systems sensor and trigger inputs reset NPC by
turning on the ignition after every third system trigger.
LED FLASHES SHUTDOWN MODE
1 System timed out
2 Over-rev shutdown
3 Low or no RPM
4 Transmitter Shutdown (or optional push-button)
6 (-) Hood Shutdown (H3/3 GRAY) or
(+) Brake Shutdown (H3/4 BROWN)
7 (-) Neutral safety shutdown (H3/6 BLACK/WHITE)
8 Wait-to-start timed out