Filter
Top Products
Delphi NAV200
57
Displaying Additional Information on the Map.
The Delphi NAV200 allows you to determine which information is to be displayed
on the map. Modifying any configuration begins on the Settings screen.
1. Open the Settings screen
- by tapping the Settings button on the Main screen
- or by tapping the Additional Functions button (or short into the
map) and selecting Settings
2. Select Map information using the arrow buttons:
The Info bar at the bottom of the map displays the altitude, the compass, and
the current speed.
3. Tap the command buttons to display (On) or not (Off) the respective
information on the map.
The desired information on the entire route (upper section) and on the current
stage (lower section) will be displayed at the right hand side of the map.
4. Tap the respective command button to display (On) or not (Off) Points of
Interest on the map.
5. Tap the respective command button to display (On) or not (Off) Street names
on the map.
6. Via the arrow buttons select Route information: