Filter
Top Products
6
Specifications - Torque Values
Torque Value
Fastener ft-lb in-lb Nm
Size &
Remarks
Cylinder head nuts 9.2 110 12 ¼”
Crankcase bolts 6.6 80 9 6 x 1.0
Spark plug (SP) (SP) (SP) 14 x 1.25
Stator bolts 2.1 25 2.8 #8
Stator cover bolts 1.7 20 2.3 #8
Clutch cover bolts 5.8 70 7.9 6 mm
Clutch 40 480 54 10***
Front axle nut 25 300 34 12 x 1.25
Front brake caliper
Engine mount bolts 22 265 30 8 mm
Swingarm Pivot 21 250 28 14 mm
Intake manifold bolts 4.6 55 6.2 6 mm
Rear Axle Bolt 25 300 34 12 mm
Rear Sprocket Bolts 18 216 24 7 mm
Fork cartridge rod 12 144 16
Triple clamp bolts 6 72 8 6 x 1.0
Fork cap 5 60 6.7 1.25” x 18
Ignition rotor nut 40 480 54 10 mm**
** Use green (wicking / bearing retainer) thread locker, with primer, on the
flywheel / crankshaft taper but none on the threads.
*** Use green (wicking / bearing retainer) thread locker, with primer, on the
crankshaft / clutch taper but use red (high strength) thread locker, with primer, on
the nut.
(SP) To apply the proper torque to the spark plug when inserting, one must first
screw the spark plug in until the metal gasket ring causes resistance and then
turn another 1/8 to ¼ turn.