Filter
Top Products
14
e. Work the damper rod up and down several times.
f. Allow to drain completely.
Assembly procedure
1. Fill the fork leg with 4 oz (118 ml) 5 wt fork oil.
2. Measure the fork oil level to the top of the fork tube with the leg collapsed,
and record for tuning purposes.
3. Install the fork spring.
4. Reconnect the damper rod to the fork cap (12 ft-lb, 16 Nm).
CAUTION:
The damper rod is hollow and will break if the nut is over tightened.
5. Reinstall the for cap into the fork leg (5 ft-lb, 6.7 Nm)
6. Reinstall the fork legs into the clamps (6 ft-lb, 8 Nm).
7. Reinstall the brake caliper.
8. Reinstall the front wheel (25 ft-lb, 34 Nm).