Filter
Top Products
24
CAUTION:
Be sure to align the piston such that the arrow on the top piston surface points to
the exhaust (front of bike/engine).
17. Apply gasket sealer (NAPA Aviation Form-A-Gasket #765-1210 or equal) to
the cylinder deck areas around the coolant passage and cylinder studs as
shown in figure 10.
Figure 10
18. Install the base gasket
19. Install the cylinder being sure that the piston rings are properly aligned with
the indexing pins.
CAUTION:
Never force the cylinder. If resistance is felt, determine the problem and solve it.
20. Install the cylinder studs and o’rings as shown in figure 11.
Figure 11
21. Install cylinder head insert.