Filter
Top Products
Extended accessory power
How many times have you parked and turned off the ignition only to realize that you
forgot to close one of the power windows? Now your IntelliPage will continue to power
your vehicle’s power windows, car stereo and other accessories even after you park and
turn off the ignition, withdrawing power only when you open the driver’s door.
AutoArming™
If this feature is enabled and you forget to remotely arm, the system will automatically arm
itself 30 seconds after all the doors are closed. For your convenience, if you re-open any
door(s) within the 30-second countdown, AutoArming will restart from the beginning
once all doors are closed. Your IntelliPage has these additional AutoArming features:
n
AutoArming enable/disable:
If you prefer, you may deactivate or reactivate the
AutoArming feature. See User-selectable features on pages 35-39.
n
Visual acknowledgment:
Five seconds after you exit the vehicle and close all the
doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
n
AutoArm & Lock:
To ensure you can’t accidentally lock your keys inside the car,
the system is factory-set not to lock the doors upon AutoArming. To change this
setting, see User-selectable features on pages 35-39.
n User-selectable entry delay: If you temporarily lose the use of your remote
controls, you may turn on the 15-second entry delay feature. This allows you to
enter the car and silently disarm the system by turning on the ignition within 15
seconds of opening the door. See User-selectable features on pages 35-39.
n Instant AutoArming bypass: Prevents AutoArming when fueling the vehicle and
other times when you wish to temporarily bypass AutoArming. To activate Instant
AutoArming Bypass, rapidly turn the ignition switch to “ON” then “OFF.” You
will hear a single siren chirp to confirm that the system will not AutoArm. The
system will revert to its normal operating mode when you next start the engine.
UltraSecure™ Coded Valet Mode
Your secret valet code
In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking
an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a
thief cannot enable the valet mode as a way of “turning off” your system. How? To enable
valet mode, the driver must first enter a secret valet code on the PlainView switch. Your
code will be a 1-to-3-digit number of your choosing. Each digit can be any number from
1 to 9. Whenever the system is in valet mode, it overrides AutoArming (see above) and
all the security features are turned off. At various times, you will need to switch the
system off. For instance, when having your car serviced, washed or parked by a valet.
Your factory-set valet code is the single digit “2.”
NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.
18