Clifford IntelliPage System Car Alarm Automobile Alarm User Manual


 
TO REMOTELY
ARM THE SYSTEM. . .
Press button 1 (channel 1) once. You will hear two chirps and the
parking lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock. On certain
vehicles, if so wired, the power windows and sunroof will
automatically close.
TO REMOTELY
DISARM THE
SYSTEM. . . . . . . . . . .
Press button 1 (channel 1) again. One chirp and one parking light
flash confirms disarming. The doors will unlock and the interior
lights will turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first. In addition, the system automatically
adjusts the driving position to the settings you have programmed
into your car’s memory seat button (see page 20 for further details).
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
Press button 3 (channel 3). Your IntelliPage system will arm or
disarm with all the indications noted above except for the chirp
acknowledgments.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 for three seconds. The lights will flash repeatedly
and the siren will blare for 30 or 60 seconds (user-selectable), or
until you press button 1 again to turn it off. If the ignition is on
(indicating you are in the car), the doors will automatically lock to
prevent an assailant from entering. If the ignition is off, the doors
will unlock, allowing you to enter without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two options with the same channel: one when
the system is armed and another when disarmed. Pressing button 2
while the alarm is armed will turn on the headlights for any
duration you wish between one second and two minutes (factory
setting is 30 seconds; see User-selectable features on pages 35-39).
TO REMOTELY
OPEN THE
TRUNK RELEASE . . . .
Button 2 (channel 2) can control an optional remote trunk release
when the system is disarmed. Pressing button 2 while the alarm is
disarmed will open the trunk if you have this option installed.
TO REMOTELY
START OR
SHUTDOWN
THE ENGINE . . . . . . . .
Before attempting to remotely start the engine, please read the
sections Remote Engine Starting and Remote Starting DOs and
DON’Ts on pages 27-29. Channel 5 (LevelShift once, then button
1) instructs your IntelliPage to remotely start your vehicle’s
engine and any preset accessories (or to shut the engine down if it
is already running under the control of your IntelliPage). The
parking lights will flash twice to acknowledge your command,
then will light and stay lit while the engine idles for on-going
confirmation.
16