Clifford IntelliPage System Car Alarm Automobile Alarm User Manual


 
— Additional Security and Convenience Features (cont.)
Advanced CMOS Microcomputers — Multiple, very large scale integration
(VLSI) microprocessors command all system functions more than 1,000,000
times per second, yet they draw less power than the vehicle’s clock.
High-Luminescence LED Status Indicator with Automatic Battery-Saving
Mode
— Adds visual deterrence and identifies system status. To conserve
vehicle battery power (since the LED draws more current than the control
unit), if the system has remained continuously armed for 48 hours, the flash
rate will automatically slow to half the normal rate. If left continuously
armed for 96 hours, the blink rate will slow to one-quarter the normal rate.
Multiple Sensor/Trigger Inputs— Separate inputs for two sensors as well as
separate inputs for the doors, trunk and hood allow for precise trigger/sensor
identification.
Full-Time Programming Access— You can easily change the status of dozens
of user-selectable features at any time, even while driving. Clear, audible
signals confirm each feature selection and setting.
Patented SmartPowerUp™ II — When power to the system is disconnected,
the system’s non-volatile memory always remembers the last state (armed,
disarmed or valet mode) and returns to that state when power is restored. So
if a thief disconnects the power, the Smart Self Powered Medallion Siren will
instantly sound and the starter and ignition systems will remain immobilized.
If the thief then restores power in an attempt to start the car, the system will
re-arm and again sound the siren, flash the parking lights and continue its
immobilization the starter and ignition until you can retrieve your vehicle and
disarm the system via your remote control or by entering your secret valet code.
Lifetime Warranty — For as long as you own the vehicle, Clifford Electronics
will repair or replace the control unit and remote controls free of charge (see
warranty card for full details).
12