Filter
Top Products
81
VRX878RVD
English
INSTALLATION
MANUAL
●Connecting the parking brake lead
Connect the lead to parking brake lamp earth in the metre panel.
Note:
• Connecting the parking brake lead to lamp earth allows you to watch TV/VTR/DVD video/video CD when the
parking brake is engaged.
• When the parking brake lead is not connected, the monitor will not turn on.
Connecting the Accessories
●Connection to the external amplifier
The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder.
●Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the main unit. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Note:
• Be sure to connect the Reverse Gear terminal to the vehicle’s relevant terminal.
• Connect the CCD camera to the RCA Pin (yellow); if not, the screen turns black while the gear lever is in the
reverse gear position.
• A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
• The power supply box for the camera CAA188 cannot be used. Please use the CAA185 instead.
●If the specified lead of the mobile phone is connected to the phone interrupt lead of the main
unit, the audio mute is available when the mobile phone is used.
●TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV tuner.
●DVD Changer
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector
purchasing separately.
●Connection to the navigation system (NAX963HD)
When the NAVI (NAX963HD) is being used…
• If the 5.1 ch surround decoder (DVH943) is connected, the voice interruptions of the NAVI will not
work.
• If the 5.1 ch surround decoder (DVH943N) is connected, the voice interruptions of the NAVI will
work.
Parking brake lamp
+ lead to battery
Parking brake
Parking brake
signal lead
Parking brake lead
(Grass-green)
Electro-tap
Stopper
1. Place the Parking brake lead at the stopper,
and fold it back in the direction of the arrow.
2. Pass the Parking brake signal lead through, and
fold it back in the direction of the arrow.
Parking brake
signal lead
Parking brake lead
(Grass-green)
Parking brake
signal lead
●How to attach the electro-tap