Filter
Top Products
RDS Operations
36
VRX878RVD
English
Owner’s manual
Manually tuning a regional station in
the same network
Note:
• This function can be used when a regional
broadcast of the same network is received.
• This function is enabled only when the AF function
is ON, and the REG function is OFF.
1. Touch the [List] key on the RDS mode
screen.
2. Touch your desired Preset key to call out a
regional station.
3. Each time you touch the same Preset key, this
unit switches from a local station to the other
on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode, so you
can listen to it. The Traffic Programme (TP)
automatic tuning is also available.
• This function can only be used when “TP” is
displayed on the screen. When “TP” is
displayed, this means that the RDS broadcast
station being received has traffic
announcement programmes.
●Setting TA standby mode
1. Press the [TA] button when only “TP” is
displayed on the screen.
“TP” and “TA” will be displayed on the screen,
and this unit will be set to the TA standby
mode until a traffic announcement is
broadcast. When a Traffic Announcement
broadcast starts, “TRA INFO” is displayed on
the screen.
If you press the [TA] button while a Traffic
Announcement broadcast is being received,
the Traffic Announcement broadcast
reception is cancelled, and this unit goes into
the TA standby mode.
●Cancelling TA standby mode
1. When “TP” and “TA” are displayed on the
screen, press the [TA] button. “TA” on the
screen goes off, and the TA standby mode is
cancelled.
* If “TP” is not displayed, press the [TA] button to
search for a TP station.
●Searching for a TP station
1. When “TP” is not displayed, press the [TA]
button.
“TA” is displayed on the screen, and this unit
automatically searches for a TP station.
Note:
• If no TP station is received, this unit continues the
search operation. Pressing the [TA] button again
makes the “TA” go off, and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into the preset memory. If the number of TP that
can be received is less than 6, the broadcast
stations already stored in memory are left without
being overwritten.
1. When “TA” is displayed on the screen, touch
the [List] key on the RDS mode screen.
2. Touch and hold the [AS] key for more than 2
seconds.
The TP stations with a good reception
condition are stored into the preset memory.
* Even if you select FM1 or FM2, TP stations are
stored into the memory for FM3.
PTY
This function enables you to listen to a broadcast
of the specified programme type when the
broadcast starts, even if this unit operates in a
source mode other than the TUNER.
• The factory default setting is “OFF”.
• Some countries do not yet have PTY
broadcast.
• In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
1. Touch the [Option] key on the RDS mode
screen to display the RDS menu.
2. Touch the [Preset] key of the PTY SELECT
item.
This unit enters into the PTY select mode.