Filter
Top Products
62
VRX878RVD
English
Owner’s manual
Digital Radio/DAB Operations
About DAB programmes
The DAB (Digital Audio Broadcasting) system
transmits several programmes on one frequency
simultaneously, by compressing audio signals.
• A DAB station has multiple programmes on
one frequency.
• The group of programmes, which is transmitted
on a single frequency is called “ensemble”.
• Some DAB stations have several ensembles
and broadcast diversified programmes.
• The number of programmes and the contents
which an ensemble provides depend on the
broadcast stations and times.
Since the DAB programmes are broadcasted
on several different frequencies, the same
programme can be enjoyed over large areas.
• When you turn this unit on and select the DAB
mode, the programme that starts is the one that
was selected before when the power was
turned off. If this programme is not available,
another programme is selected automatically.
• Programmes have their own names, just like
PS on RDS.
Note:
• To improve audio quality, the receiver needs to
tune in to an ensemble. While the receiver is being
tuned in to the ensemble, the Audio outputs are
muted. The tuning time is not fixed.
• The following functions can be used by the same
operations as the RDS operations (see page 35):
• AF function
• TA (Traffic Announcement)
• Selecting PTY
• PTY seek
• PTY preset memory
• Emergency broadcast
• Setting volume of TA, emergency broadcast
(ALARM), information, and PTY
Listening to the DAB
1. Press the [SRC] button, and touch the [DAB]
key.
2. Press the [BAND] button or touch the [Band]
key to select the band from M1, M2 and M3.
Each time the button is pressed, the reception
band changes in the following order:
M1 ➜ M2 ➜ M3 ➜ M1 ...
* This unit has the separated preset memory
function for DAB stations. Up to 18 stations (6
for each M1, M2 and M3) can be preset in the
Preset keys.
3. Press the [R] or [F] button to recall the
stored programme.
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired band (M1, M2 or
M3).
•If “MANU” is displayed at the bottom of the
screen, keep pressing the [BAND] button
more than 1 second.
“MANU” on the screen goes off, and seek
tuning is now available.
* The same operation is available by using the
[Band] key.
2. Touch and hold the [X] or [x] key more than
1 second to tune in to an ensemble.
3. Touch the [X] or [x] key to switch the
programme.
Note:
• Programmes may not be switched depending on
the ensemble or broadcasting time.
Service scan
This function scans through each receivable
programme in an ensemble being received for 10
seconds sequentially. This is useful when you
want to search for a desired programme.
1. Touch the [List] key on the DAB mode
screen, and touch the [S.SCN] key.
This unit starts scanning each programme for
10 seconds sequentially.
2. When a programme which you want to listen
is turned in, touch the [S.SCN] key again.
Recalling a preset station
This unit has the separated preset memory
function for DAB stations. Up to 18 stations (6 for
each M1, M2 and M3) can be preset in the Preset
keys.
There are 2 ways available to recall the preset
station.
●Using the [R] or [F] button
1. Press the [BAND] button to select the band
(M1, M2 or M3).
2. Press the [R] or [F] button to recall the
previous or next stored programme.
●Using the Preset List screen
1. Touch the [List] key.
2. Touch the corresponding Preset key to recall
the stored programme.
* You can select the desired band by touching
the [Band] key.
3. Touch the [List] key to return to the previous
screen.