Filter
Top Products
35
VRX878RVD
English
Owner’s manual
RDS Operations
RDS (Radio Data System)
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS
data.
This system can display the name of the
broadcast station being received (PS), and can
automatically switch to the broadcast station with
the best reception as you move long distances
(AF switching).
Also, if a traffic announcement or programme
type information is broadcast from an RDS
station, no matter what mode you are in, this
broadcast is received. Additionally, if EON
information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic
announcement and/or chosen programme type
from other stations (TP). This function is not
available in some areas.
• The RDS interrupt does not function during AM
(MW/LW) radio reception or in TV mode.
Note:
• When you store a station without broadcasting
RDS data to the preset memory, store the station
after receiving more than 10 seconds. If you store
such a station within 10 seconds, it will be stored
as an RDS station, and the RDS tracking function
will work when tuning in.
Display the RDS menu
When using the RDS function, always set the
radio band to an FM mode.
1. Touch the [Option] key on the RDS mode
screen to display the RDS menu.
AF function
The AF function switches to a different frequency
on the same network in order to maintain
optimum reception.
• The factory default setting is “ON”.
• When the AF function is on, “AF” blinks on the
screen.
●Switching ON/OFF the AF function
1. Touch the [ON] or [OFF] key of the AF item to
turn the function on or off.
* If the reception of the current broadcast station
deteriorates durably, “SEARCH” is displayed
on the screen, and this unit searches for the
same programme on another frequency.
●AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, this
unit switches automatically to the broadcast with
the better reception.
• This function only operates when the DAH923
DAB unit, sold separately, is connected.
1. Press the [ADJ] button to display the ADJUST
mode menu.
2. Touch the [GENERAL] key, and touch the [C]
key.
3. Touch the [ON] or [OFF] key of the LINK ACT
item.
ON:
AF switching between DAB and RDS is
enabled.
OFF:
AF switching between DAB and RDS is
disabled.
4. Touch the [Back] key to return to the previous
screen.
REG (Regional Programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area is
switched as you drive, a regional station for that
region is received.
• The factory default setting is “OFF”.
• When the REG function is ON, “REG” is
displayed on the screen.
Note:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is enabled only
when the AF function is ON.
1. Touch the [ON] or [OFF] key of the REG item
to turn the function on or off.
“AF” : Alternative Frequency
“PS” : Programme Service Name
“PTY” : Programme Type
“EON” : Enhanced Other Network
“TP” : Traffic Programme