Filter
Top Products
Basic Operations
29
VRX878RVD
English
Owner’s manual
Setting the BEEP
The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
• The factory default setting is “ON”.
Setting the Blink LED
You can set the unit to blink the LED indication
when the DCP (Detachable Control Panel) is
removed.
Performing the system check
Changing the output speaker for the
mobile phone
• The factory default setting is “RIGHT”.
• To output the telephone calls, set the following
TEL SWITCH item to “ON”.
Note:
• During mobile phone interrupts, setting this
function is disabled.
Mobile phone interrupt setting
When you connect your mobile phone to this unit
using a separately sold cable, you can listen to
your telephone calls on your car speakers.
• The factory default setting is “OFF”.
Note:
• This function is not compatible with all mobile
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
• When you set this function to “OFF”, disconnect
the mobile phone from the cable or turn off the
power of the mobile phone.
Setting the voice input line for the
mobile phone
When you connect your mobile phone to this unit,
select the connection method of the adaptor box.
• The factory default setting is “CeNET”.
Note:
• When setting to “AUX”, the VISUAL mode is
altered to the ACCESSORY mode.
3-1. Touch the [ON] or [OFF] key of the BEEP
item to turn the function on or off.
3-1. Touch the [ON] or [OFF] key of the BLINK
LED item to turn the function on or off (The
factory default setting is “OFF”).
3-1. Touch the []] key of the SYSTEM CHECK
item.
The available operation mode is listed in
white letters.
3-2. Touch [Check] key at the top right of the
screen to perform the system check
manually.
The system will be restarted after
performing the system check.
3-1. Touch the []] key to display the next menu
screen.
3-2. Touch the [LEFT] or [RIGHT] key of the TEL
SP item to set to “LEFT” or “RIGHT”.
LEFT:
Telephone calls are heard from the left
speaker connected to this unit.
RIGHT:
Telephone calls are heard from the right
speaker connected to this unit.
3-1. Touch the []] key to display the next menu
screen.
3-2. Touch the [ON], [OFF] or [MUTE] key of the
TEL SWITCH item to set to “ON”, “OFF” or
“MUTE”.
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
* When listening to your calls on your car
speakers, you can adjust the volume using
the [E]/[e] buttons.
OFF:
This unit continues normal operation even
when you use the mobile phone.
MUTE:
The sound from this unit is muted during
telephone calls.
3-1. Touch the [C] key to display the next menu
screen.
3-2. Touch the [CeNET] or [AUX] key of the TEL
SELECT item to set to “CeNET” or “AUX”.
CeNET:
Selects when the adaptor box is connected
via the CeNET.
AUX:
Selects when the adaptor box is connected
to Audio (left/right) of the Visual input
terminal.