Filter
Top Products
5.1 ch Surround Decoder Operations
69
VRX878RVD
English
Owner’s manual
Selecting the Dolby PLII (Dolby Pro
Logic II) type
• The factory default setting is “OFF”.
* This setting is disabled when both the CENTER
SP and SURROUND SP items of the SPEAKER
SEL setting are set to “OFF”.
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the Dolby PLII item.
3. Touch the key for the desirable type to select.
4. Touch the [Back] key to return to the previous
screen.
Output adjustment of subwoofer
volume, centre volume and balance/
fader
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the DETAIL item to
display the submenu.
3. Perform the following adjustments:
●Subwoofer volume adjustment
●Centre volume adjustment
●Balance/Fader adjustment
3-1. Touch the [[] or []] key of the
SUBWOOFER VOL item to adjust to
desirable level (Setting range: –6 to 3).
• The factory default setting is “0”.
3-1. Touch the [[] or []] key of the CENTER VOL
item to adjust to desirable level (Setting
range: –6 to 0).
• The factory default is “0”.
3-1. Touch the []] key of the BAL/FAD item.
Touch the [{] or [}] key to adjust the fader
level.
[{] key:
Emphasises the sound from the front
speakers.
[}] key:
Emphasises the sound from the rear
speakers.
3-2. Touch the [[] or []] key to adjust the balance
level.
[[] key:
Emphasises the sound from the left
speakers.
[]] key:
Emphasises the sound from the right
speakers.
4. Touch the [Back] key to return to the
previous screen.