Filter
Top Products
License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of
the license plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
Replacement Bulbs
Exterior Lamp Bulb Number
Back-up 3057KX
Front Turn Signal, DRL and
Parking
3157NAK
High-Beam and Low-Beam
Headlamps
H11
License Plate Lamp 168
Sidemarker 194
Stoplamp, Taillamp and Turn
Signal
3057KX
For replacement bulbs not listed here, contact
your dealer.
475