Filter
Top Products
Arming with the Remote Keyless Entry
Transmitter
Your alarm system will arm if the key is not in the
ignition and you use your remote keyless entry
transmitter to lock the doors. The security light will
flash to let you know the system is arming. If
you press the transmitter’s lock button twice within
five seconds, the horn will sound. After all doors
and the liftgate are closed and locked, the security
light will begin flashing at a very slow rate to let
you know the system is armed.
Arming with Your Key
Your alarm system will arm when you use your
key to lock the driver’s door. The security light will
flash to let you know the system is arming.
After all doors and the liftgate are closed and
locked, the security light will begin flashing at a
very slow rate to let you know the system is
armed. If you would like your key not to arm the
system, see DIC Vehicle Personalization (Uplevel
Only) on page 275.
Arming Confirmation
If remote unlock confirmation is on, the turn signal
lamps will flash briefly to let you know when
your alarm system has disarmed. If you would not
like the turn signal lamps to flash, see DIC
Vehicle Personalization (Uplevel Only) on
page 275.
Disarming with the Remote Keyless
Entry Transmitter
Your alarm system will disarm when you use your
remote keyless entry transmitter to unlock the
doors. The security light will stop flashing to let you
know the system is no longer armed.
Disarming with Your Key
Your alarm system will disarm when you use your
key to unlock the driver’s door. The security
light will stop flashing to let you know the system
is no longer armed. If you would like your key
not to disarm the alarm system, see DIC Vehicle
Personalization (Uplevel Only) on page 275.
147