Filter
Top Products
FOB LOCK FEEDBACK
This feature allows you to select the type of
feedback you will receive when locking the vehicle
with the remote keyless entry transmitter.
Press the menu button until FOB LOCK
FEEDBACK appears on the DIC display. Press
the set/reset button to scroll through the following
choices:
OFF: There will be no feedback when locking the
vehicle.
LIGHTS: The exterior lamps will flash when you
press the lock button on the remote keyless
entry transmitter.
LIGHTS and HORN (default): The exterior lamps
will flash when you press the lock button on the
remote keyless entry transmitter, and the horn will
sound when the lock button is pressed again
within five seconds of the previous command.
Choose one of the available settings and press the
menu button while it is displayed on the DIC to
select it and move on to the next feature.
REMOTE START
If your vehicle has remote start, this feature allows
the remote start to be turned OFF or ON. The
remote start feature allows you to start the engine
from outside of the vehicle using the remote
keyless entry transmitter. See “Remote Vehicle
Start” under Remote Keyless Entry System
Operation on page 121 for more information.
Press the menu button until REMOTE START
appears on the DIC display. Press the set/reset
button to scroll through the following choices:
OFF: The remote start feature will be disabled.
ON (default): The remote start feature will
be enabled.
Choose one of the available settings and press
the menu button while it is displayed on the DIC to
select it and move on to the next feature.
REAR PARK CHIME
If your vehicle has the Ultrasonic Rear Parking
Assist (URPA) system, this feature allows
the URPA system’s chime to be turned OFF or
ON. See Ultrasonic Rear Parking Assist (URPA)
on page 212 for more information.
280