Your vehicle also has
passenger power sliding
door activation
switch(es).
If you have a single PSD, this switch is located in
front of the passenger side sliding door. If your
vehicle has dual PSDs, the switches are located in
front of both sliding doors.
Power Sliding Door Operation
The power sliding door(s) will only open if the
transaxle is in PARK (P). The transaxle does not
have to be in PARK (P) to close the door(s).
There are several ways to open and close the
power sliding door(s).
• If your vehicle has a single power sliding door,
press the top of the overhead console PSD
activation/override (deactivation) switch.
• If your vehicle has dual power sliding doors,
press the top of the driver’s side and/or
passenger’s side overhead console PSD
activation/override (deactivation) switch.
• Press the passenger PSD activation switch.
This switch will also stop a moving door
immediately.
Passenger PSD
Activation Switch
136