Filter
Top Products
To use a portable audio player, connect a 3.5 mm
(1/8 inch) cable to the radio’s front auxiliary
input jack. When connecting an auxiliary device,
the radio automatically detects the device and “Aux
Input Device” displays. The device begins
playing audio over the vehicle speakers. If an
auxiliary device has already been connected, the
device does not begin playing audio until the
radio’s CD/AUX button is pressed.
O (Power/Volume): Turn this knob clockwise or
counterclockwise to increase or decrease the
volume of the portable player. You might need to
do additional volume adjustments from the
portable device.
BAND: Press this button to listen to the radio
when a portable audio device is playing. The
portable audio device continues playing, so you
might want to stop it or power it off.
CD/AUX (CD/Auxiliary): Press this button to play
a CD when a portable audio device is playing.
Press this button again and the system begins
playing audio from the connected portable audio
player. If a portable audio player is not
connected, “No Aux Input Device Found” displays.
Using an MP3
MP3/WMA CD-R or CD-RW Disc
The radio plays MP3 and WMA files that were
recorded on a CD-R or CD-RW disc. The files
can be recorded with the following fixed bit rates:
32 kbps, 40 kbps, 56 kbps, 64 kbps, 80 kbps,
96 kbps, 112 kbps, 128 kbps, 160 kbps, 192 kbps,
224 kbps, 256 kbps, and 320 kbps or a variable
bit rate. Song title, artist name, and album can
display when files are recorded using ID3 tags
version 1 and 2.
Compressed Audio
The radio also plays discs that contain both
uncompressed CD audio (.CDA files) and
MP3/WMA files. By default the radio reads only
the uncompressed audio and ignores the
MP3/WMA files. Pressing the CAT (category)
button toggles between compressed and
uncompressed audio format.
280