Filter
Top Products
Alerting the Driver
The Adaptive Cruise
Control alert symbol is
located on the
display at the top of the
instrument panel to
the right of the driver.
The alert symbol will flash and a warning beep will
sound when driver action may be required. If
Adaptive Cruise Control is engaged, the alert
symbol will flash when:
• Adaptive Cruise Control cannot apply sufficient
braking because you are approaching a
vehicle too rapidly.
• The vehicle speed drops below about
20 mph (32 km/h).
• A temporary condition prohibits Adaptive
Cruise Control from operating. See DIC
Warnings and Messages on page 239 for
more information.
• A malfunction is detected in the system. See
DIC Warnings and Messages on page 239
for more information.
See Defensive Driving on page 296.
{CAUTION:
Adaptive Cruise Control has only limited
braking ability to slow your vehicle. In
some cases, Adaptive Cruise Control may
not have time to slow your vehicle enough
to avoid a collision. Be ready to take
action and apply the brakes yourself. See
Defensive Driving on page 296.
179