Filter
Top Products
AudioPilot
®
: If your vehicle has the Bose
®
Premium audio, the system has AudioPilot
®
noise
compensation technology.
To use AudioPilot
®
press the Automatic Volume
Control screen button to access the AudioPilot
®
menu and then press the ON screen button.
AudioPilot
®
automatically adjusts the volume level
of the audio so that it always sounds the same.
The feature is most effective at lower volume
settings where background noise can be louder
than the audio. At high volume settings there might
be little or no change in the audio level. In some
cases where the noise level changes quickly,
you can hear the audio level changing. This
is normal. For more information on AudioPilot
®
,
visit www.bose.com.
To activate AudioPilot
®
, do the following steps:
1. Set the radio volume to the desired level.
2. Press the MENU button to display the radio
setup menu.
3. Press the pushbutton located under the AUTO
VOLUM label on the radio display.
4. Press the ON or OFF button to turn this
feature on or off.
Finding a Station
BAND: Press this button to switch between AM,
FM, or XM™ (if equipped). The selection displays.
a (Tune): Turn this knob to select radio
stations.
© SEEK ¨: Press the right or left SEEK arrow
to go to the next or to the previous station and
stay there.
To scan stations, press and hold either SEEK
arrow for three seconds until a beep sounds. The
radio goes to a station, plays for a few seconds,
then goes to the next station. Press either
SEEK arrow again to stop scanning.
The radio only seeks and scans stations with a
strong signal that are in the selected band.
268