Filter
Top Products
Setting Cruise Control
{CAUTION:
If you leave your cruise control on when
you are not using cruise, you might hit a
button and go into cruise when you do not
want to. You could be startled and even
lose control. Keep the cruise control switch
off until you want to use cruise control.
The cruise control
buttons are located on
left side of the
steering wheel.
I (On): This position turns on the system.
+ RES (Resume/Accelerate): Press this button
to make the vehicle accelerate or resume to
a previously set speed.
SET– (Set): Press this button to set the
speed.
[ (Cancel): Press this button to cancel cruise
control.
Cruise control will not work if the parking brake
is set, or if the master cylinder brake fluid level
is low.
If the brakes are applied, the cruise control
shuts off.
The cruise light on the instrument panel cluster
comes on after the cruise control has been set to
the desired speed.
1. Press the cruise control button.
2. Get up to the desired speed.
3. Press the SET– button located on the steering
wheel and release it.
4. Take your foot off the accelerator.
170