Filter
Top Products
Resuming a Set Speed
Suppose you set the cruise control at a desired
speed and then you apply the brake. This shuts off
the cruise control. But you do not need to reset it.
Once the vehicle is traveling approximately
25 mph (40 km/h) or more, you can press the
+RES (resume/accelerate) button to return to
your desired preset speed. The cruise light
displays again.
The vehicle returns to and stays at your preset
speed. If you press and hold the +RES button, the
vehicle speed increases until you release the
button or apply the brake. Do not hold in the
+RES button, if you do not want the vehicle
speed to increase.
Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed:
• Use the accelerator pedal to get to the higher
speed. Press the SET– button, then release
the button and the accelerator pedal. The
vehicle now cruises at the higher speed.
• Press the +RES button. Hold it there until you
get up to the desired speed, and then release
the button. To increase your speed in very
small amounts, briefly press the +RES button
and then release it. Each time you do this,
the vehicle accelerates approximately
1 mph (1.6 km/h).
The accelerate feature only works after you have
set the cruise control speed by pressing the
SET– button.
171