Filter
Top Products
Easy Exit Seat
The control for this feature is located on the
driver’s door panel between buttons 1 and 2.
With the vehicle in PARK (P), the exit position can
be recalled by pressing the exit button. You will
hear a single beep. The driver’s seat will move
back, and if the vehicle has the power tilt wheel and
telescopic steering feature, the power telescopic
steering column will move up and forward.
If the easy exit seat feature is on in the DIC,
automatic seat and power telescopic steering
column movement will occur when the key
is removed from the ignition. See “EASY EXIT
SEAT” under DIC Vehicle Customization on
page 252 for more information.
Further programming for automatic seat and
steering wheel movement can be done using the
Driver Information Center (DIC). You can select
or not select the following:
• The easy exit seat feature
• The memory seat recall feature
For programming information, see DIC Vehicle
Customization on page 252.
Power Reclining Seatbacks
Your seats have power
reclining seatbacks. Use
the vertical power seat
control located on the
outboard side of the
seat to operate them.
• To recline the seatback, press the control
toward the rear of the vehicle.
• To raise the seatback, press the control toward
the front of the vehicle.
13