Filter
Top Products
When you press the exterior lamps control, the fog
lamp lights on the instrument panel cluster will
come on to indicate that the fog lamps and
the parking lamps are on.
Press the button again to turn them off.
If you turn on the high-beam headlamps, the fog
lamps will turn off. They will turn back on again
when you switch to low-beam headlamps.
When automatic lighting is on and the fog lamps
are turned on, the fog lamps, headlamps and
parking lamps will remain on.
The ignition must be on for the fog lamps
to operate.
Some localities have laws that require the
headlamps to be on along with the fog lamps.
Cornering Lamps
The cornering lamps come on when the
headlamps or parking lamps are on and you
signal a turn with the multifunction lever. They
provide more light for cornering.
Exterior Lighting Battery Saver
If the manual parking lamps or headlamps have
been left on, the exterior lamps will turn off
approximately 10 minutes after the ignition is
turned to OFF. This protects against draining the
battery in case you have accidentally left the
headlamps or parking lamps on. The battery saver
does not work if the headlamps are turned on
after the ignition switch is turned to OFF.
If you need to leave the lamps on for more than
10 minutes, use the exterior lamp control to
turn the lamps back on.
Instrument Panel Brightness
D(Instrument Panel Brightness): This
feature controls the brightness of the
instrument panel lights.
The button for this control is located below the
exterior lamps control.
Push the button in and release to extend the
button. Turn the button clockwise for brightness of
the instrument panel lights and counter clockwise
to turn the brightness down.
192