Filter
Top Products
Cleaning the IntelliBeam™ Light Sensor
The light sensor is
located on the inside of
the vehicle in front of the
inside rearview mirror.
Clean the light sensor window, periodically, using
glass cleaner on a soft cloth. Gently wipe the
sensor window. Do not spray glass cleaner directly
on the surface of the sensor window.
Wiper Activated Headlamps
This feature activates the headlamps and parking
lamps after the windshield wipers are turned
on and have completed eight wipe cycles within
four minutes.
When the ignition is turned to OFF, the
wiper-activated headlamps immediately turn off.
The wiper-activated headlamps also turn off if the
windshield wipers are turned off.
Headlamps on Reminder
A warning chime will sound if the exterior lamp
control is left on in either the headlamp or parking
lamp position and the driver’s door is opened
with the ignition off.
Daytime Running Lamps (DRL)
Daytime Running Lamps (DRL) can make it easier
for others to see the front of your vehicle during
the day. DRL can be helpful in many different
driving conditions, but they can be especially
helpful in the short periods after dawn and before
sunset. Fully functional daytime running lamps
are required on all vehicles first sold in Canada.
The DRL system will make the turn signal
lamps come on when the following conditions
are met:
• It is still daylight and the ignition is on.
• The exterior lamp control is in the off position.
• The transaxle is not in PARK (P) (United
States only).
• The light sensor is covered or not detecting
light. See “Sensors” under Dual Climate
Control System on page 204.
190