Battery Replacement
To change the remote control batteries, do the
following:
1. Remove the battery compartment door
located on the bottom of the remote control.
2. Replace the two AA batteries in the
compartment. Make sure that they are
installed correctly, using the diagram on
the inside of the battery compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period
of time, remove the batteries and keep them in a
cool, dry place.
Problem Recommended Action
No power. The ignition might not be
turned on or in accessory.
The picture does not
fill the screen. There
are black borders on the
top and bottom or on
both sides or it looks
stretched out.
Check the display
mode settings in the
display menu.
Problem Recommended Action
In auxiliary mode, the
picture moves or scrolls.
Check the auxiliary
input connections at
both devices.
The remote control
does not work.
Check to make sure
there is no obstruction
between the remote
control and the
transmitter window.
Check the batteries to
make sure they are
not dead or installed
incorrectly.
After stopping the
player, I push Play but
sometimes the DVD
starts where I left off
and sometimes at the
beginning.
If the stop button was
pressed one time, the
DVD player will resume
playing where the
DVD was stopped.
If the stop button was
pressed two times the
DVD player will begin to
play from the beginning
of the DVD.
308