Filter
Top Products
ON: The driver’s seat will move back when the
key is removed from the ignition.
The automatic easy exit seat movement will
only occur one time after the key is removed
from the ignition. If the automatic movement has
already occurred, and you put the key back in
the ignition and remove it again, the seat will stay
in the original exit position, unless a memory
recall took place prior to removing the key again.
NO CHANGE: No change will be made to
this feature. The current setting will remain.
Choose one of the available settings and press
the set/reset button while it is displayed on the
DIC to select it.
MEMORY SEAT RECALL
This feature allows you to select your preference
for the remote memory seat recall feature.
See Memory Seat, Mirrors, and Pedals on
page 13 for more information.
Press the customization button until MEMORY
SEAT RECALL appears on the DIC display. Press
the set/reset button once to access the settings
for this feature. Then press the customization
button to scroll through the following settings:
OFF (default): No remote memory seat recall
will occur.
ON: The driver’s seat will automatically move
to the stored driving position when the unlock
button on the remote keyless entry transmitter
is pressed.
NO CHANGE: No change will be made to this
feature. The current setting will remain.
Choose one of the available settings and press
the set/reset button while it is displayed on the
DIC to select it.
262