Filter
Top Products
To scan preset stations, press and hold the
double arrow scan button for more than
two seconds until you hear a beep and PSCAN
appears on the display. The radio will go to the
first preset station, play for five seconds, and
then go on to the next preset station. Press this
button again to stop scanning presets.
The radio will only scan stations with a strong
signal that are in the selected band.
A LOCAL/DISTANT Selection: With this feature
you can set the radio to search for local stations
or stations that are further away for a larger
selection. To set this feature to LOCAL or
DISTANT, perform the following steps:
1. Press the tune/sel knob to enter the
main menu.
2. Turn the tune/sel knob until SEEK LOCAL
or SEEK DISTANT appears on the display.
3. Press the tune/sel knob to select either
LOCAL or DISTANT.
4. Press the BACK (F6) button to exit the
display. To return to the original display,
repeatedly press the BACK (F6) button or
wait for the display to time out.
To search for stations, press the single arrow
buttons. If the system is set to LOCAL, SEEK
will appear on the display and seek to stations
with strong signals only. If the system is set
to DISTANT, D-SEEK will appear on the display
and seek to stations with weak and strong signals.
Setting Preset Stations
Up to 30 stations (six AM, six FM1, six FM2,
and six XM1 and six XM2 (if equipped)), can be
programmed on the six numbered pushbuttons,
by performing the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1, FM2, or
XM1 or XM2 (if equipped).
270