Filter
Top Products
DRIVER IN PARK: Only the driver’s door will
unlock when the vehicle is shifted into PARK (P).
ALL AT KEY OUT: All of the doors will unlock
when the key is taken out of the ignition.
ALL IN PARK (default): All of the doors will
unlock when the vehicle is shifted into PARK (P).
NO CHANGE: No change will be made to this
feature. The current setting will remain.
Choose one of the available settings and press
the set/reset button while it is displayed on the
DIC to select it.
REMOTE DOOR LOCK
This feature allows you to select the type of
feedback you will receive when locking the
vehicle with the remote keyless entry transmitter.
You will not receive feedback when locking
the vehicle with the remote keyless entry
transmitter if the doors are open. See Remote
Keyless Entry System Operation on page 113
for more information.
Press the customization button until REMOTE
DOOR LOCK appears on the DIC display. Press
the set/reset button once to access the settings
for this feature. Then press the customization
button to scroll through the following settings:
OFF: There will be no feedback when you press
the lock button on the remote keyless entry
transmitter.
LIGHTS ONLY: The exterior lamps will flash
when you press the lock button on the remote
keyless entry transmitter.
HORN ONLY: The horn will sound on the
second press of the lock button on the remote
keyless entry transmitter.
HORN & LIGHTS (default): The exterior lamps
will flash when you press the lock button on the
remote keyless entry transmitter, and the horn
will sound when the lock button is pressed again
within five seconds of the previous command.
NO CHANGE: No change will be made to this
feature. The current setting will remain.
Choose one of the available settings and press
the set/reset button while it is displayed on the
DIC to select it.
257