Filter
Top Products
Removing the Third Row Seat
To remove the seat, do the following:
1. Open the liftgate to access the controls
for the seat.
2. Fold the seatback forward using the
instructions listed under “Folding the
Seatbacks” previously. The seat cannot be
removed unless the seatback is folded.
3. Unlatch the seat
from the floor by
pulling the carrying
handle, located
at the rear of
the seat, rearward.
4. Roll the seat out of the vehicle. There is a
track in the floor to guide the seat wheels
out of the vehicle.
Installing the Third Row Seat
To install the seat, do the following:
1. Open the liftgate to access the rear of
the vehicle.
2. Slide the front outboard seat wheels into the
track on the floor and roll the seat forward.
The front latches should lock into place.
If the latches do not lock, try tilting the rear
of the seat upward slightly.
3. Lower the rear of the seat and push down on
the seat to engage the rear floor latches.
{CAUTION:
A seat that is not locked into place
properly can move around in a collision
or sudden stop. People in the vehicle
could be injured. Be sure to lock the seat
into place properly when installing it.
36