Filter
Top Products
DVD Messages
If the disc comes out, it could be for one of the
following reasons:
• It is very hot. When the temperature returns
to normal, the disc should play.
• You are driving on a very rough road.
When the road becomes smoother, the
disc should play.
• The disc is dirty, scratched, wet, or
upside down.
• The air is very humid. If so, wait about
an hour and try again.
• The region code on your DVD may not be
correct for your region.
• The format of the disc may not be compatible.
See “MP3 Format” earlier in this section.
• There may have been a problem while
burning the disc.
• The label may be caught in the DVD player.
If the disc is not playing correctly, for any
other reason, try a known good disc.
If any error occurs repeatedly or if an error cannot
be corrected, contact your GM dealer. If the
radio displays an error message, write it down
and provide it to your GM dealer when reporting
the problem.
Playing a DVD Video
F1 (Play/Pause): Press this pushbutton to turn on
the video screen, if your vehicle has this feature,
and begin playing the DVD. Press this pushbutton
to pause the DVD if it is playing. Press Play (F1)
to restart the DVD if it is paused.
F2 (Stop): Press this pushbutton once to stop
the DVD and retain your current position. Press
it again from the stopped state to return to
the beginning of the disc.
F3 (Reverse): Press and hold this pushbutton,
if the DVD is playing, to enter fast reverse mode.
Holding the pushbutton will play in reverse at
four times the normal speed. After holding it for
more than four seconds it will play in reverse
at 32 times the normal speed. Release the
pushbutton to return to normal play mode.
290