Filter
Top Products
4. Snap the front and the back of the transmitter
together.
5. Test the operation of the transmitter with
the vehicle.
To replace the battery in this type of RKE
transmitter do the following:
1. Use a flat object with a thin edge into the notch,
located below the trunk release button, and
separate the bottom half from the top half of
the transmitter.
2. Remove the old battery, but do not use a
metal object to do this.
3. Slide the new battery into the transmitter with
the positive side of the battery facing down.
Use a type CR2032 battery, or equivalent type.
Make sure the cover is on tightly, so water will
not get in.
4. Snap the front and the back of the transmitter
together tightly so moisture does not get in.
5. Test the operation of the transmitter with
the vehicle.
Remote Vehicle Start
Your vehicle may have a remote starting feature.
This feature allows you to start the engine
from outside of the vehicle. It may also start up
the vehicle’s heating or air conditioning systems
and rear window defogger. Normal operation of
the system will return after the key is turned to
the RUN position.
If your vehicle has an automatic climate control
system, during remote start, the climate control
system will default to a heating mode during
colder outside temperatures and a cooling
mode during warmer outside temperatures.
117