Cadillac 2007 Automobile User Manual


 
3. Tune in the desired station.
4. Press and hold one of the six numbered
pushbuttons for two seconds until you
hear a beep. The set preset station number
will appear on the display above the
pushbutton that it is set to. Whenever that
numbered pushbutton is pressed for less
than two seconds, the station that was set
will return.
5. Repeat the steps for each pushbutton.
To set the preset stations with an equalization
setting, DSP setting, or a PTY setting, see
each of these features later in this section.
When a preset station is selected, once
one of these additional settings is selected,
the preset station will remember each setting
and it will remain active, until the setting is
selected off for that preset station.
AUTOSTORE PRESETS: To set the preset
stations automatically, perform the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1, or FM2.
3. Press the tune/sel knob to enter the
main menu.
4. Turn the tune/sel knob until AUTOSTORE
PRESETS appears on the display.
5. Press the tune/sel knob to select.
AUTOSTORE will appear on the display.
The radio will automatically search the band
and select and store the six radio stations with
the strongest signal. The stations will be
stored by signal strength, not sequential order.
The set preset station number will appear
on the display above the pushbutton that it
is set to.
6. Press the BACK (F6) button to exit the
display. To return to the original display,
repeatedly press the BACK (F6) button or
wait for the display to time out.
When battery power is removed and later applied,
you will not have to reset your radio presets.
271