Buhler 2500 Automobile Accessories User Manual


 
bühler
2500 Bale Carrier
6
Never leave the tractor unattended while the 2500 Bale Carrier is hooked up, always
shut tractor off and remove key before leaving the tractor seat. A child or even a pet
could engage an idling machine.
Keep the 2500 Bale Carrier on solid ground, rocks and holes can be dangerous for
operation and movement.
Prior to use, check to ensure the attachment is properly hitched.
Improper use of the 2500 Bale Carrier and tractor can cause serious injury or death.
Never operate 2500 Bale Carrier with frayed or damaged hoses or leaking fittings. A
burst could cause one or more hydraulic components to behave erratically causing
serious injury or loss of life.
Operate 2500 Bale Carrier only while seated in the tractor seat.
Do not load bales improperly, always load according to the manual’s operation
procedures.
If for some reason you feel the tractor tipping immediately lower lift arms.
Do not raise lift arms to extreme heights while tractor is on an incline. Be alert for
terrain changes and adjust accordingly.
Allow for 2500 Bale Carrier and tractor length when turning.
Do not overload the GVW of 37 440 LB (16983 kg) and when loaded keep the speed
below 20 mph (32 km/h).
Before allowing anyone to operate the machine, for however a short time or
distance, make sure they have been instructed in its safe and proper use.
Review the manual and all safety related items with all operators annually.
correct other operators not using recommended procedures before an accident
occurs.
When assembling, operating and servicing machinery, wear all the protective
clothing and personal safety devices that could be necessary for the job at hand.
Never work beneath a raised lift arm unless it is securely supported. The control
handle can be moved or a hydraulic leak could cause the arm to drop resulting in
serious injury or death.
Use only service and repair parts made or approved by the equipment manufacturer.
substituted parts may not meet strength, design, or safety requirements.
Do not modify the machine. Unauthorized modifications may impair the function
and/or safety and affect machine life.
Keep the area used for servicing machinery clean and dry. Wet
or oily floors are slippery. Wet spots can be dangerous when
working with electrical equipment. Be sure all electrical outlets
and tools are properly grounded.
Keep machinery clean. Straw and chaff on hot surfaces are a fire hazard. Do not
allow oil or grease to accumulate on service platforms, ladders or controls. Clean
machines before storage.
Never use gasoline, naphtha or any volatile material for cleaning purposes. These
materials may be toxic and/or flammable.
When storing machinery, cover sharp or extending components to prevent injury
from accidental contact.