Filter
Top Products
bühler
2500 Bale Carrier
3
GENERAL SPECIFICATIONS:
Dimensions:
- Length: 45’ (13.7 m)
- Deck Length: 37’ (11.3 m)
- Width: 12’ 9” (3.9 m)
- Weight (empty): 9,587 LB (4349 kg)
- Drawbar Vertical Load (empty): 2395 LBF (10653 N)
- GVW: 37440 LB (16983 kg)
Capacity:
- Total bale payload: 28065 LB (12731 kg)
- Bales up to 6’ (1.8 m) diameter maximum to 4’ (1.2 m) diameter minimum
- Hay crop, small grains, and flax straw
- Sixteen 4’ (1.2 m) wide bales
- Fourteen 5’ (1.52 m) wide bales
Tires:
- 8-12.5L x 15 FI - 12 ply, Load Range F, Farm Hwy Service tire
- Six bolt heavy duty hubs with twine guards
- Walking beam axle design
Control Handle:
- Power: 12v
- Fuse: 15 amp (surge protection provided on machine)
Hydraulics:
- Two remote tractor hydraulics circuits required for operation
- Closed-center hydraulic standard.
- In-field configuration is required for open-center or load-sensing tractors
- Two lift cylinders with restrictor
- Two tilt cylinders with restrictor
- Four 22.2 cu. inch (363.79 cu cm) hydraulic motors
- See Appendix B for details on hydraulic components
Tractor:
- Size: 100 hp (75kW) recommended
- Weight: As per ASAE specification ASAE S365.4 the tractor must weight 25000 LB
(11340 kg) to adequately handle a GVW of 37440 LB (16983 kg)
- Maximum loaded towing speed 20 mph (32 km/h)