Filter
Top Products
bühler
2500 Bale Carrier
17
MAINTENANCE
CAUTION
Place all controls in neutral, stop engine, set parking brake,
remove ignition key and wait for all moving parts to stop before servicing, adjusting or
repairing the 2500 Bale Carrier.
CAUTION
Ensure the 2500 Bale Carrier tires and hitch are securely
block. Otherwise, verify the 2500 Bale Carrier is properly coupled to the drawbar on a
tractor with a minimum mass of 25000 LB (11340 kg).
NOTE:
Service intervals should be increased when operating in extreme or difficult
conditions.
1. Fasteners
Inspect all bolt torques after first use and 50 hours thereafter.
Periodically inspect for broken or missing fasteners. Replace with fasteners of
similar size and equivalent grade.
The table below lists the correct torque values for various bolts and cap screws
used on the bale carrier. Tighten all bolts to specified values unless otherwise
noted.
BOLT TORQUE
SAE 2 SAE 5 SAE 8
BOLT
DIAMETER
"A"
lb-ft N.m lb-ft N.m lb-ft N.m
1/4" 6 8 9 12 12 17
5/16" 10 13 19 25 27 36
3/8" 20 27 33 45 45 63
7/16" 30 41 53 72 75 100
1/2" 45 61 80 110 115 155
9/16" 70 95 115 155 165 220
5/8" 95 123 160 215 220 298
3/4" 155 225 290 390 400 540
7/8" 170 230 420 570 650 880
1" 225 305 630 850 970 1320
LOCATION
lb-ft
N.m
WHEEL HUB BOLTS 125 170
ALL CARRIAGE BOLTS 33 45