Step 4Step 4
Step 4Step 4
Step 4
Warning: Use of power tools can be dangerous. If you are not qualified to use a cut-
off tool as described, seek the help of a trained professional. ALWAYS wear safety
glasses when working with or around power tools.
Remove Slash Guard/Dust Shield
Use a 10mm wrench or sockett to remove the
bolts holding the dust shield
Use a cut-off wheel to cut the edge of the shield
in the area shown. Cut as far as possible without
cutting into the spindle or upright.
Use a plier to twist un-cut portion of
the shield until it tears through.
Rotate the shield and make a second cut far enough
from the first that when the cut section is removed
the shield can be worked off the upright.
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
www.stoptech.com 10
