SEATS KOMFORT–LOK® LATCH
Regional Haul
(R05/10) Y53-6033 – 79 –
Komfort–Lok® Latch
Your Peterbilt contains a feature designed to eliminate
cinching and provide improved safety and comfort. Cinch-
ing is the condition where a belt becomes continually
tighter around you during a rough, bouncy ride. The need
for this feature increases with rough road conditions, par-
ticularly over long distances. To eliminate cinching, simply
activate the Komfort–Lok®
feature at the appropriate
time:
1. Fasten the seatbelt according to the directions in the
previous “Safety Belt Restraint” section.
2. You are now ready to activate the Komfort–Lok. Lean
forward to pull a little slack in the belt (maximum of
one inch, measured from the belt to your chest). Be
sure to allow only a small amount of slack.
3. When the slack is right, flip the latch cover up, cinch-
ing it into place.
4. To release the Komfort–Lok latch, reach up and pull
the latch cover open (down), or simply pull down on
the shoulder belt.
5. When you want to get out of the cab, release the
latch, then just push the button on the buckle.
The Komfort–Lok latch
LATCH COVER
UP
LATCH COVER
DOWN
02395
