CONSUMER INFORMATION AND VEHICLE IDENTIFICATION PREVENTIVE MAINTENANCE
– 262 – Y53-6033
Regional Haul (R05/10)
examples for the specified axle ratings. These compo-
nents may not be the ones actually installed on the axle,
because there are many other appropriate combinations.
The “PSI Cold” inflation pressure on the Certification
Label is for the tire-rim combination in the example, and
may not be the same as the recommended inflation pres-
sure for the actual tires on that axle.
Check the manufacturer's product information for the tires
and rims actually on each axle to obtain recommended
tire inflation pressure for specific applications.
Incomplete Vehicle Certification Label
The Incomplete Vehicle Certification Label (for trucks) is
located on the driver’s door frame. It contains the follow-
ing information:
• DATE OF MANUFACTURE
• VIN — Vehicle Identification Number
• LISTING OF APPLICABLE FEDERAL MOTOR VEHI-
CLE SAFETY STANDARDS
Noise Emission Label
The Noise Emission Label is in the map compartment. It
contains information regarding U.S. noise emission regu-
lations and date of manufacture.
Paint Data Label
The Paint Data Label contains the paint colors used by
the factory to paint your vehicle. It lists frame, wheels, cab
interior and exterior colors. This label is located in the map
compartment.
Sample of complete vehicle Certification Label
