MAINTENANCE SCHEDULE AND LUBRICATION PREVENTIVE MAINTENANCE
– 164 – Y53-6033
Regional Haul (R05/10)
EP: Extreme Pressure lubricant
GL: Straight mineral gear lubricant
HD: Hypoid Gear Oil, A.P.I. — GL–5/SAE 80W–90
HT: High Temperature grease (Timken Specification 0–616)
MP: Multipurpose gear lubricant (MIL–L–2105B)
SD: Engine oils with increased protection against temperature deposits,
rust, wear, and corrosion.
WB: Wheel Bearing grease (Timken Specification 0–610)
NOTE: The responsibility for meeting these spec-
ifications, the quality of the product, and its perfor-
mance in service rests with the lubricant supplier.
Oil Reservoirs
For oil reservoirs with side filler plugs (transmissions,
axles, steering gear boxes, transfer cases, etc.), the oil
must be level with the filler opening.
APPLICATION LUBRICANT
Universal Joints EP
Drive Shaft Splines CL
Wheel Bearings (driven hubs) HD
Wheel Bearings (nondriven hubs) CD50
Steering Column CL
Alternator Bearing BB*
Fan Hub BB*
Power Steering Reservoir ATF
Steering Drag Link CL
Steering Knuckles CL
Spring Pins CL
Clutch Release Bearings BB
Brake Shoe Anchor Pins HT
Brake Cam Bearings HT
Slack Adjusters CL
Starter Bearings CC
Turbocharger Aneroid CC
Water Pump BB*
*Consult manufacturer or lubricant supplier for special details.
APPLICATION LUBRICANT
