CONTROLS AND DISPLAY OPTIONAL GAUGES
Regional Haul
(R05/10) Y53-6033 – 45 –
operate the signal, move the lever in the direction of the
turn. Each time the turn indicator is activated the audbile
alarm emits a short beep.
High Beam Headlamps
NOTE: The headlamps must be “ON” for the high
beam switch to operate.
• To switch your headlamps to lower or higher beam,
gently pull the turn signal lever towards the steering
wheel, until you hear the switch click and the beam
changes. The blue indicator light in the instrument
panel will be ON when the high beam is being used.
• To return to previous beam: pull the lever towards the
steering wheel again.
Headlamp Flash
To activate headlamp flash, gently push the turn signal
lever away from the steering wheel until you hear and feel
the switch click. Release lever to deactivate.
• If your headlamps are off, low beams will flash on.
• If your headlamps are on, they will dim. Maximum
duration of dimming is 3 seconds. When the function
ends, your headlamps will return to low beams.
ID And Clearance Lights Flash
To flash, press the button on the end of the turn signal
lever and hold. To cancel the flash, release the button.
